The newly updated Lead4Pass 200-401 dumps with PDF and VCE and free online practice

200-401 exam

The newly updated Lead4Pass 200-401 dumps contain 64 exam questions and answers, as well as provide difficult analysis, in line with the Cisco 200-401 IMINS certification exam conditions!

Because Lead4Pass 200-401 dumps are actually verified by a professional team, it is real and effective! And provide two learning types: 200-401 dumps PDF, and 200-401 dumps VCE, both types contain the latest 200-401 exam questions!

So, get the latest 200-401 dumps in PDF or VCE format from Lead4Pass:, to ensure you pass the exam easily.

Two free surprises:

  1. Get some Lead4Pass 200-401 dumps in PDF format
  2. Online practice section Lead4Pass 200-401 dumps

First Surprise: Online Download Section Lead4Pass 200-401 dumps:

The second surprise: online practice part Lead4Pass 200-401 dumps

TypeNumber of exam questionsExam nameExam code
Free15Managing Industrial Networks with Cisco Networking Technologies (IMINS)200-401
Question 1:


Select and Place:

200-401 dumps questions 1

Select and Place:

200-401 dumps questions 1-1


Correct Answer:

200-401 dumps answers 1


Question 2:


A small manufacturing company has a Class C network address on the plant floor and needs to create five subnets, each accommodating 25 endpoints. Which subnet mask needs to be configured?








Correct Answer: D

Question 3:



200-401 dumps questions 3

Refer to the exhibit. Host 3 on Network A is sending data to Host 8 on Network B. Which address is the default gateway of Host 3?

A. the address of the switch interface that is connected to router interface Fa0/0

B. the address of the switch interface that is connected to router interface Fa0/1

C. the address of the host that is connected to Network A

D. the address of the host that is connected to Network B

E. the address of the router interface Fa0/0

F. the address of the router interface Fa0/1


Correct Answer: E

Question 4:


Which of the following correctly pairs the dotted decimal subnet mask with the correct number of binary bits that represent the subnet mask?

A. and /25

B. and /28

C. and /26

D. and /27

E. and /28

F. and /16


Correct Answer: E

Question 5:



200-401 dumps questions 5

Refer to the exhibit. Which port should a PLC with IP address be plugged into in order to communicate to the rest of the network?

A. FastEthernet1/1

B. FastEthernet1/2

C. FastEthernet1/3

D. FastEthernet1/4

E. FastEthernet1/5


Correct Answer: C

Question 6:


Which option allows an EtherNet/IP I/O device to be safely installed where it is subject to water immersion?

A. The device is rated IP20 and the power wiring is installed securely to the terminal block.

B. The device is rated IP67 and a power cord set is used.

C. The device is rated IP67 and immersed to 10 m.

D. The device is rated IP20 and immersed to 10 m.


Correct Answer: B

Question 7:


Exhibit: Refer to the exhibit. What are the three traffic and interconnection requirements for the devices in the exhibit? (Choose three.)

200-401 dumps questions 7

A. The EtherNet/IP drive connections are in a high-voltage area and need protection from electromagnetic noise, so a shielded cable that is rated for 600 V is advised.

B. EtherNet/IP devices such as the controller, drive, VoIP phone, and IP camera should be in the same VLAN.

C. CIP traffic has the highest bandwidth requirement so it needs the highest QoS setting.

D. EtherNet/IP drive traffic has a high sensitivity to random drops, latency, and jitter.

E. Real-time motion control and VoIP traffic can share the same VLAN with the proper QoS setting.

F. IEEE1588 and PTP are important for ensuring real-time synchronization.


Correct Answer: ADF

Question 8:



200-401 dumps questions 8

Which two statements are correct for a safe wiring installation to the terminal block of the switch or endpoint? (Choose two.)

A. Insert a green ground wire into the terminal block that is marked RT for return.

B. Verify that DC power is live and within the 24 VDC voltage range before starting wiring.

C. Verify that the DC power circuit includes an overcurrent protective device that limits the DC current to 5


E. Because this is a low-voltage DC circuit, anyone can install this wiring without electrical training or qualifications.

F. Connect the positive 24 VDC conductor to the V terminal and connect the negative 24 VDC return wire to the RT terminal.

G. A ground wire can optionally be connected to the screw terminal on the front of the switch.


Correct Answer: CE

Question 9:


What are the two benefits of a star network topology? (Choose two.)

A. Disruption of the entire network is not required when adding new machines.

B. Any problem which leaves the network inoperable can be traced to the central hub.

C. This network type requires less cable as compared to linear bus topology.

D. The performance of one of the numerous nodes cannot reflect on the performance of other nodes.

E. The performance of the entire network is directly dependent on the performance of the hub.


Correct Answer: AB

Question 10:


Which three of the following components must be elected before the Spanning Tree Protocol can converge in a switched LAN? (Choose three.)

A. designated ports

B. duplex operating mode

C. fast mode ports

D. root bridge

E. root ports

F. BDPU priority


Correct Answer: ADE

Question 11:


What is the purpose of the Spanning Tree Protocol?

A. to prevent routing loops

B. to create a default route

C. to provide multiple gateways for hosts

D. to maintain a loop-free Layer 2 network topology

E. to enhance the functions of SNMP


Correct Answer: D

Question 12:


Why is SSH preferred over Telnet as a method of accessing a network device to alter or view the configuration?

A. Telnet encrypts only the login information, not the entire transmission.

B. SSH requires fewer network resources and no additional configuration.

C. Telnet is more difficult to use and configure than SSH.

D. SSH encrypts the login and session information.


Correct Answer: D

Question 13:


Given a ring topology, which loop prevention mechanism provides the fastest reconvergence time after a link failure?

A. Rapid Per-VLAN Spanning Tree Protocol

B. Resilient Ethernet Protocol

C. Multiple Spanning Tree Protocol

D. Spanning Tree Protocol


Correct Answer: B

Question 14:


Which two ports does EtherNet/IP use to communicate? (Choose two.)

A. TCP 44818

B. UDP 44818

C. TCP 502

D. UDP 502

E. TCP 2222

F. UDP 2222


Correct Answer: AF

Question 15:


EtherNet/IP is an Ethernet implementation of which protocol?


B. Industrial Protocol

C. DeviceNet

D. ControlNet


Correct Answer: A


Enjoy two premium benefits for free! Although they are only part of the Lead4Pass 200-401 dumps!

Now, use PDF or VCE to practice Lead4Pass 200-401 dumps: (64 Q&A), assisting you to pass the Cisco 200-401 IMINS certification exam 100% successfully.

Leave a Reply