The newly updated Lead4Pass 300-430 dumps with PDF and VCE and free online practice

300-430 dumps

The newly updated Lead4Pass 300-430 dumps contain 220 exam questions and answers, as well as provide difficult analysis, in line with the Cisco 300-430 ENWLSI certification exam conditions!

Because Lead4Pass 300-430 dumps are actually verified by a professional team, it is real and effective! And provide two learning types: 300-430 dumps PDF, and 300-430 dumps VCE, both types contain the latest 300-430 exam questions!

So, get the latest 300-430 dumps in PDF or VCE format from Lead4Pass:, to ensure you pass the exam easily.

Two free surprises:

  1. Get some Lead4Pass 300-430 dumps in PDF format
  2. Online practice section Lead4Pass 300-430 dumps

First Surprise: Online Download Section Lead4Pass 300-430 dumps:

The second surprise: online practice part Lead4Pass 300-430 dumps

TypeNumber of exam questionsExam nameExam codeLast updated
Free15Implementing Cisco Enterprise Wireless Networks (ENWLSI)300-430300-430 dumps
Question 1:

A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments. Which solution must the engineer choose?

A. Configure a second WLC to support half of the APs in the deployment.

B. Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.

C. Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.

D. Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the 5.0- GHz band.


Correct Answer: B


Question 2:


A corporation has recently implemented a BYOD policy at its HQ. Which two risks should the security director be concerned about? (Choose two.)

A. network analyzers

B. malware

C. lost and stolen devices

D. keyloggers

E. unauthorized users


Correct Answer: BC

Question 3:


Which two restrictions are in place with regard to configuring DNS? (Choose two.)

A. mDNS uses only UDP port 5436 as a destination port.

B. mDNS cannot use UDP port 5353 as the destination port.

C. mDNS is not supported on FlexConnect APs with a locally switched WLAN.

D. Controller software must be newer than 7.0.6+.

E. mDNS is not supported over IPv6.


Correct Answer: CE Restrictions for Configuring Multicast DNS mDNS over IPv6 is not supported.

mDNS snooping is not supported on access points in FlexConnect mode in locally switched WLAN and mesh access points. For locally switched WLANs, all multicast traffic including mDNS is simply bridged between the local VLAN and the SSID.

Question 4:


An engineer configures the wireless LAN controller to perform 802.1x user authentication. Which configuration must be enabled to ensure that client devices can connect to the wireless, even when WLC cannot communicate with the RADIUS?

A. pre-authentication

B. local EAP

C. authentication caching

D. Cisco Centralized Key Management


Correct Answer: B


Question 5:


Which QoS level is recommended for guest services?

A. gold

B. bronze

C. platinum

D. silver


Correct Answer: B


Question 6:


Which feature on the Cisco Wireless LAN Controller must be present to support dynamic VLAN mapping?

A. FlexConnect ACL

B. VLAN name override


D. AAA override


Correct Answer: D

Question 7:


Which two statements about the requirements for a Cisco Hyperlocation deployment are true? (Choose two.)

A. After enabling Cisco Hyperlocation on Cisco CMX, the APs, and the wireless LAN controller must be restarted.

B. NTP can be configured, but that is not recommended.

C. The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and Cisco CMX.

D. The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.

E. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation deployments.


Correct Answer: CE

Question 8:


An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which element do you configure in a rule?

A. permit-ACL

B. WMM required

C. mark

D. rate-limit


Correct Answer: C

Question 9:


An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN. Which configuration is needed to complete this task?

A. Change the WLAN reserved bandwidth for WebEx

B. Create an AVC profile for WebEx

C. Create an ACL for WebEx

D. Change the AVC application WebEx-app-sharing to mark


Correct Answer: B

Webex-app-sharing is for sharing traffic only (doesn’t include Webex-audio or Webex-video) for streaming.

Question 10:


Which three properties are used for client profiling of wireless clients? (Choose three.)

A. HTTP user agent



D. hostname

E. OS version

F. IP address


Correct Answer: ABC


Question 11:


Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?

300-430 dumps practice questions 11

A. Option A

B. Option B

C. Option C

D. Option D


Correct Answer: D

300-430 dumps practice answers 11 Note: To enable Local switching, you have to disable central switching

Question 12:


What is the difference between PIM sparse mode and PIM dense mode?

A. Sparse mode supports only one switch. The dense mode supports multi switch networks.

B. Sparse mode floods. The dense mode uses distribution trees.

C. Sparse mode uses distribution trees. Dense mode floods.

D. Sparse mode supports multi-switch networks. The dense mode supports only one switch.


Correct Answer: C

Question 13:


Refer to the exhibit.

300-430 dumps practice questions 13

Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)



C. 802.11e




Correct Answer: CD

The 802.11e, WMM, and Cisco Compatible Extension specifications help balance and prevent the overloading of a cell with audio streams. CAC determines whether there is enough channel capacity to start a call; if not, the phone can scan for another channel

Question 14:


A user is trying to connect to a wireless network that is configured for WPA2-Enterprise security using a corporate laptop. The CA certificate for the authentication server has been installed on the

Trusted Root Certification Authorities store on the laptop. The user has been prompted to enter the credentials multiple times, but the authentication has not succeeded. What is causing the issue?

A. There is an IEEE invalid 802.1X authentication policy on the authentication server.

B. The user’s Active Directory account is locked out after several failed attempts.

C. There is an invalid 802.1X authentication policy on the authenticator.

D. The laptop has not received a valid IP address from the wireless controller.


Correct Answer: A ment/ Dot1x_Dep_Guide.html

Question 15:


A new MSE with wIPS service has been installed and no alarm information appears to be reaching the MSE from controllers. Which protocol must be allowed to reach the MSE from the controllers?






Correct Answer: B

NMSP (Network Mobility Services Protocol)?The protocol used for communication between Wireless LAN Controllers and the Mobility Services Engine. In the case of a wIPS Deployment, this protocol provides a pathway for alarm information to be aggregated from controllers to the MSE and for wIPS configuration information to be pushed to the controller. This protocol is encrypted.


Enjoy two premium benefits for free! Although they are only part of the Lead4Pass 300-430 dumps!

Now, use PDF or VCE to practice Lead4Pass 300-430 dumps: (220 Q&A), assisting you to pass the Cisco 300-430 ENWLSI certification exam 100% successfully.

Leave a Reply