What are Cisco 350-601 Dumps? Cisco 350-601 dumps are preparation materials that provide real-time, valid exam practice questions and answers to help you pass the exam. Currently, the latest 350-601 dumps contain 576 exam practice questions and answers, available in both PDF and VCE formats as study tools.
Download the complete exam preparation materials at https://www.leads4pass.com/350-601.html, 100% guaranteed to help you easily study and successfully pass the 2025 DCCOR exam.
What is the 2025 DCCOR Exam?
Full Name: Implementing and Operating Cisco Data Center Core Technologies (DCCOR)
Duration: 120 minutes
Language: English
Cost: Approx. $400 USD (check official site for exact pricing)
Certification: Passing grants Cisco Certified Specialist – Data Center Core certification and counts as a core exam for CCNP Data Center and CCIE Data Center certifications.
Exam Content: Tests knowledge and skills in the following core data center technologies:
- Network: Routing protocols (OSPF, BGP), switching protocols (RSTP+, LACP, vPC), etc.
- Compute: UCS server management, HyperFlex architecture, firmware updates, etc.
- Storage Network: SAN connectivity, Fibre Channel, VSAN configuration, etc.
- Automation: Scripting, APIs, configuration management tools, etc.
- Security: Data center security policies, access control, etc.
Question Types: Multiple-choice, drag-and-drop, fill-in-the-blank, possibly including simulation questions (no actual simulator).
Cisco 350-601 DCCOR exam is moderately to highly difficult, recommending 3-5 years of networking experience and familiarity with Cisco data center technologies. However, there’s no need to worry! By following our latest 350-601 dumps and completing the practice tasks step-by-step, you can stay focused, identify weaknesses, and enhance your skills. Next, you can try a free online practice test to test your abilities!
Latest 350-601 Dumps Exam Practice Questions
| Number of exam questions | Free Download | Related |
| 15 (Free) | 350-601 PDF | CCNP Data Center |
Question 1:
A network administrator must configure an extra keyring in Cisco UCS Manager. The key must provide a high level of encryption and secure authentication when users use the web interface. Which configuration command set must be applied to meet these requirements?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: B
UCS-A# scope system UCS-A /system # scope services UCS-A /system/services # enable https UCS-A /system/services* # set https port 443 Warning: When committed, this closes all the web sessions. UCS-A /system/services* # set https keyring kring7984 UCS-A /system/services* # set https cipher-suite-mode high UCS-A /system/services* # set https ssl-protocol tls1-2 UCS-A /system/services* # commit-buffer
Question 2:
An engineer needs to perform a backup of user roles and locales from Cisco UCS Manager to replicate the setting to a different fabric interconnect. The engineer wants to review the file before importing it to a target fabric interconnect. Which backup type must be selected to meet these requirements?
A. all configuration
B. system configuration
C. logical configuration
D. full state
Correct Answer: B
Question 3:
Refer to the exhibit.
A network engineer must monitor the traffic from the server on VLAN 80. All source traffic from the server must be captured on the monitoring device.
Which configuration set meets these requirements?
A. switch(config-monitor)# destination interface ethernet 1/1 switch(config-monitor)# source vlan 80
B. switch(config-monitor)# destination interface ethernet 1/1 switch(config-monitor)# filter vlan 80
C. switch(config-monitor)# destination interface ethernet 1/2 switch(config-monitor)# filter vlan 80 rx tx
D. switch(config-monitor)# destination interface ethernet 1/2 switch(config-monitor)# source vlan 80 rx
Correct Answer: A
Question 4:
A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of “warning” and above. For security reasons, the users must be logged out of the console after 5 minutes of inactivity. Which configuration must be applied to meet these requirements?
A. MDS-A(config)# logging console 5 MDS-A(config-console)# exec-timeout 300
B. MDS-A(config)# line console MDS-A(config-console)# speed 38400 MDS-A(config-console)# exec-timeout 5 MDS-A(config)# logging console 4
C. MDS-A(config)# logging line 4 MDS-A(config-console)# session-limit 300
D. MDS-A(config)# console MDS-A(config-console)# speed 38400 MDS-A(config-console)# session-limit 5 MDS-A(config)# logging console 5
Correct Answer: B
Question 5:
An engineer must perform a backup and restore in Cisco UCS to rebuild the system in a disaster recovery scenario. The backup file must be encrypted to prevent the passwords from being stored as cleartext. Which backup configuration meets these requirements?
A. Full state backup over TFTP
B. Logical configuration backup over SCP
C. System configuration backup over FTP
D. All configuration backup over SFTP
Correct Answer: A
Question 6:
Refer to the exhibit.
A flapping link issue has been reported on the vPC keepalive link. A packet capture has been activated on the Cisco Nexus switch. What is the destination IP address of the vPC keepalive packets that are sent by the switch?
A. 192.168.254.4
B. 239.255.70.83
C. 192.168.254.1
D. 192.168.254.2
Correct Answer: A
Question 7:
Refer to the exhibit. A source is sending a multicast traffic stream to the receiver. How is the multicast traffic expected to flow through the network when it reaches a vPC peer?
A. The multicast traffic is not replicated to the ports that joined a multicast group (224.0.0.13) or the peer link. The multicast traffic stream flows over the vPC link to ensure that orphan ports get the multicast stream in failure scenarios.
B. The multicast traffic is replicated to the ports that joined a given multicast group and the peer link. The multicast traffic stream flows from Agg-1 to Agg-2 over the M1-to-M2 peer link and forwards the traffic over Layer 4 to Access-2.
C. The multicast traffic is replicated to the ports that joined a given multicast group and the peer link. The multicast traffic stream flows over the peer link to ensure that orphan ports receive the multicast stream in failure scenarios.
D. The multicast traffic is not replicated to the ports that joined a multicast group (224.0.0.13) or the peer link. The multicast traffic stream flows from Agg-1 to Agg-2 over the M1-to-M2 peer link and forwards the traffic over Layer 4 to Access-2.
Correct Answer: C
Multicast data traffic flows down the source tree to active forwarding vPC peer device. vPC peer device 1 (7K1) sends a copy of the multicast traffic out of the vPC member port connected to access switch. One another copy is sent out of vPC peer-link. As there is no single-attached device (or orphan port) interested by this multicast traffic on the other side, vPC peer device 2 (7K2) will drop the multicast traffic
Question 8:
A bridge domain is being extended out of a Cisco ACI fabric. Between which of these components are policies used to identify the connectivity between Endpoint Groups and the external connection?
A. an external bridge domain and an external routed domain
B. internal contracts and external contracts
C. internal EPGs and external EPGs
D. L2Out and L3Out
Correct Answer: C
Question 9:
DRAG DROP
An engineer must authenticate EIGRP configuration on interface Eth1/1 of the Cisco Nexus 9000 Series Switch. Drag and drop the CU commands from the right to complete the EIGRP key authentication configuration on the left. Not all CLI commands are used.
Select and Place:
Correct Answer:
Question 10:
Which storage protocol reduces file locks by using leasing?
A. CIFS
B. NFS 4
C. NFS 3
D. SMB
Correct Answer: D
https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2016/pdf/BRKCOM-1211.pdf
Question 11:
A network architect must design an automation solution to initially support networking and also support the server infrastructure in the future. To keep configuration consistency, the network team requires a solution that enforces the desired state of the network and reverts any manual configuration. Which solution meets these goals?
A. NX-API
B. Ansible
C. Terraform
D. Puppet
Correct Answer: D
Question 12:
What is a characteristic of the install all command on the Cisco Nexus Series Switch?
A. automatically checks the image integrity
B. continues the upgrade process if any step in the sequence fails
C. upgrades only certain modules
D. impacts data plane traffic
Correct Answer: A
install all command automatically checks the image integrity, which includes the NXOS software image. The command performs a platform validity check to verify that a wrong image is not used.
Question 13:
A network engineer must deploy a configuration backup policy to the cisco UCS manager. The file generated from this backup must have a snapshot of the entire system that should be used to restore the system during disaster recovery. The backup file must be transferred insecurely by using the TCP protocol. Which configuration backup settings meet these requirements?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: B
Question 14:
An engineer must configure the HSRP protocol between two Cisco Nexus 9000 Series Switches. This configuration is present on Nexus A.
The final HSRP configuration must meet these requirements:
The HSRP communication must be secured on both switches. Both switches must support more than 300 groups.
Which two commands must be added to the HSRP configuration on Nexus A to complete these requirements? (Choose two.)
A. authentication text 1020
B. hsrp version 1
C. authenticate md5 key-chain NHRP-KEYS
D. hsrp version 2
E. authentication text 1010
Correct Answer: CD
Question 15:
An engineer needs to create a new user in the local user database on Cisco UCS Fabric Interconnect. The user needs permissions to change the following configuration inside UCS Manager version 3.1:
1.
vNIC and vHBA profiles
2.
Fan speed and power redundancy profile of UCS Manager
Which two roles must be assigned to a user to achieve this goal? (Choose two.)
A. server-compute
B. facility-manager
C. operations
D. server-equipment
E. server-profile
Correct Answer: AD
…
Cisco DCCOR (350-601) FAQs
What are the key topics covered in the 350-601 DCCOR exam?
Answer: The exam focuses on Network (routing/switching), Compute (UCS, HyperFlex), Storage Network (SAN, Fibre Channel), Automation (scripting, APIs), and Security (RBAC, AAA).
How long should I prepare for the exam?
Answer: Typically 2-4 months, with 2-3 hours of daily study, using official guides, practice tests, and hands-on labs.
How important is hands-on experience for the exam?
Answer: Critical. Familiarity with UCS, Nexus switches, and SAN configurations is key, as questions often test practical application.
Are there any recent changes to the 350-601 exam in 2025?
Answer: No major updates confirmed for 2025, but check Cisco’s official site for the latest blueprint, as minor tweaks may occur.
Is hands-on lab experience necessary to pass the 350-601 exam?
Answer: Yes, hands-on experience with Nexus switches, UCS servers, and SAN setups is crucial, as many questions test practical configuration and troubleshooting skills.
In conclusion, I want to tell everyone:
2025 DCCOR exam is not scary, download the latest 350-601 dumps at https://www.leads4pass.com/350-601.html, choose any PDF or VCE simulation environment tool to help you achieve your goals easily!