Here you can find the newly updated 010-151 DCTECH dumps page: https://www.leads4pass.com/010-151.html.
Lead4Pass 010-151 DCTECH dumps come with two study tools, PDF and VCE, you can choose at will, easy to study, and help you quickly improve your exam skills, and pass the Supporting Cisco Data Center System Devices exam.
Develop the 010-151 DCTECH dumps question for the Supporting Cisco Data Center System Devices core objective:
Remediation services (hardware failure repair) for Cisco data center products, including hardware replacement, software, and configuration backup and recovery, checking security and environmental requirements, identifying connection types and cabling requirements, and performing basic physical layer troubleshooting, Helping you succeed in the 010-151 DCTECH Supporting Cisco Data Center System Devices exam.
Cisco 010-151 Exam Details:
The following basic information must be known to candidates for Supporting Cisco Data Center System Devices. Below I will share some of the exam knowledge you need to know.
010-151 is the Supporting Cisco Data Center System Devices exam code, the most popular certification for Cisco CCT. Specific information can be viewed at:
Vendor: Cisco
Exam Code: 010-151
Exam Name: Supporting Cisco Data Center System Devices
Certification: CCT Data Center
Duration: 90 minutes
Languages: English
Price: $125 USD
And also get a free copy of 010-151 Dumps exam questions and answers
Question 1:
Which method does FCIP use to enable connectivity of geographically distributed Fibre Channel SANs over IP?
A. routing
B. tunneling
C. handshaking
D. transporting
Correct Answer: B
Question 2:
Which fiber optic cable type is used most often with a Subscriber connector?
A. dual-mode
B. single-mode
C. straight-mode
D. multi-mode
E. subscriber-mode
Correct Answer: B
Question 3:
Which type of connection across the network does a SAN allow for multiple servers to access an unlimited amount of storage devices?
A. any-to-many
B. many-to-any
C. any-to-any
D. any-to-one
E. one-to-any
F. one-to-one
Correct Answer: C
Question 4:
Which two statements about PCIe are true? (Choose two.)
A. The PCIe link is built around dedicated unidirectional couples of serial, point-to-point connections known as lanes.
B. You can install a PCI Express x8 adapter into an x4 slot.
C. The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path.
D. The PCIe 1.0 standard doubles the transfer rate compared to PCIe 2.0.
E. A link that is composed of four lanes is called an x4 link.
Correct Answer: AE
Question 5:
Where do you find the model number of a Cisco MDS 9200 Series chassis?
A. on the top front of the chassis next to the serial number
B. on the bottom front of the chassis next to the Cisco logo
C. on the top front of the chassis next to the Cisco logo
D. on the bottom front of the chassis next to the serial number
Correct Answer: C
Question 6:
How do you find the serial number of a Cisco UCS 5108 Blade Server chassis?
A. Use the Cisco UCS Admin.
B. Use the Cisco UCS Application.
C. Use the Cisco UCS Assistant.
D. Use the Cisco UCS Manager.
Correct Answer: D
Question 7:
What does the system status LED look like when an over temperature or major alarm occurs on the Cisco UCS 6120XP Fabric Interconnect?
A. Amber
B. Red
C. Blinking amber
D. Blinking red
Correct Answer: C
Question 8:
Refer to the exhibit.
Which item does F represent?
A. HDD 1
B. TFP Module
C. SuperCap Module
D. CPU 2
E. CMOS Battery
Correct Answer: D
Question 9:
Refer to the exhibit.
Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?
A. A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.
B. A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.
C. A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.
D. A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.
Correct Answer: A
Question 10:
Which processor option is supported in the Cisco UCS C420 M3 Server?
A. up to two Intel Xeon E5-4600 series multicore processors
B. up to two Intel Xeon E7-4800 series multicore processors
C. up to four Intel Xeon E5-4600 series multicore processors
D. two or four Intel Xeon E7-8800 series multicore processors
Correct Answer: C
Question 11:
Which two major components does a Cisco Nexus 1000V Series Switch have? (Choose two.)
A. Virtual Fiber Channel Module
B. Virtual Ethernet Module
C. Virtual Supervisor Module
D. Virtual Memory Controller Module
E. Virtual Network Module
Correct Answer: BC
Question 12:
Which Cisco Nexus 5000 Series model supports 1/10G BASE-T ports?
A. Cisco Nexus 5548P
B. Cisco Nexus 5548UP
C. Cisco Nexus 5596UP
D. Cisco Nexus 5596T
Correct Answer: D
Question 13:
Refer to the exhibit.
Which Cisco MDS chassis supports the 48-Port 16-Gbps Fibre Channel Switching Module?
A. MDS 9509
B. MDS 9513
C. MDS 9710
D. MDS 9506
Correct Answer: C
Question 14:
Refer to the exhibit.
What is the name of this rack-mount server?
A. Cisco UCS C220 Rack-Mount Server
B. Cisco UCS C240 Rack-Mount Server
C. Cisco UCS C420 Rack-Mount Server
D. Cisco UCS C460 Rack-Mount Server
Correct Answer: C
Question 15:
Refer to the exhibit.
Which item does A represent?
A. Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers
B. Virtual Interface Card for Cisco UCS B420 M3 Blade Servers
C. mLOM for Cisco UCS B420 M3 Blade Servers
D. Virtual Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers
E. SuperCap module for Cisco UCS B420 M3 Blade Servers
Correct Answer: C
……
Lead4Pass 010-151 Dumps: https://www.leads4pass.com/010-151.html (PDF+VCE Total Questions: 136 Q&A)