The newly updated leads4pass 300-730 dumps contain 171 exam questions and answers, as well as provide difficult analysis, in line with the Cisco 300-730 SVPN certification exam conditions!
Because leads4pass 300-730 dumps are actually verified by a professional team, it is real and effective! And provide two learning types: 300-730 dumps PDF, and 300-730 dumps VCE, both types contain the latest 300-730 exam questions!
So, get the latest 300-730 dumps in PDF or VCE format from leads4pass: https://www.leads4pass.com/300-730.html, to ensure you pass the exam easily.
Two free surprises:
- Get some leads4pass 300-730 dumps in PDF format
- Online practice section leads4pass 300-730 dumps
First Surprise: Online Download Section leads4pass 300-730 dumps: https://drive.google.com/file/d/1nklJ2xbETfPc6UHsdHGDQ5YBortD-cbR/
The second surprise: online practice part leads4pass 300-730 dumps
| Type | Number of exam questions | Exam name | Exam code |
| Free | 15 | Implementing Secure Solutions with Virtual Private Networks (SVPN) | 300-730 |
Question 1:
A second set of traffic selectors is negotiated between two peers using IKEv2. Which IKEv2 packet will contain details of the exchange?
A. IKEv2 IKE_SA_INIT
B. IKEv2 INFORMATIONAL
C. IKEv2 CREATE_CHILD_SA
D. IKEv2 IKE_AUTH
Correct Answer: C
The IKEv2 CREATE_CHILD_SA packet is used to establish a new security association (SA) between two peers. This packet contains the details of the exchange, including the traffic selectors, the cryptographic algorithms and keys to be used, and any other relevant information.
Question 2:
Refer to the exhibit. The DMVPN tunnel is dropping randomly and no tunnel protection is configured. Which spoke configuration mitigates tunnel drops?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: C
Question 3:
On a FlexVPN hub-and-spoke topology where spoke-to-spoke tunnels are not allowed, which command is needed for the hub to be able to terminate FlexVPN tunnels?
A. interface virtual-access
B. ip nhrp redirect
C. interface tunnel D. interface virtual-template
Correct Answer: D
A: has no sense
B: spoke to spoke is not allowed and this command is used for spoke to spoke
c: makes no sense
D: most right answer as this command is needed on the hub for hub and spoke communication.
Question 4:
Which statement about GETVPN is true?
A. The configuration that defines which traffic to encrypt originates from the key server.
B. TEK rekeys can be load-balanced between two key servers operating in COOP.
C. The pseudotime that is used for replay checking is synchronized via NTP.
D. Group members must acknowledge all KEK and TEK rekeys, regardless of configuration.
Correct Answer: A
Question 5:
Refer to the exhibit. Which two tunnel types produce the show crypto ipsec sa output seen in the exhibit? (Choose two.)
A. crypto map
B. DMVPN
C. GRE
D. FlexVPN
E. VTI
Correct Answer: BE
for whoever tested it in the lab, For flexvpn the output of show crypto ipsec sa, starts with the following: CSR1#show crypto ipsec sa interface: Virtual-Access // not interface: Tunnel0 So it should be B and E
Question 6:
Which two changes must be made in order to migrate from DMVPN Phase 2 to Phase 3 when EIGRP is configured? (Choose two.)
A. Add NHRP shortcuts on the hub.
B. Add NHRP redirects on the spoke.
C. Disable EIGRP next-hop-self on the hub.
D. Enable EIGRP next-hop-self on the hub.
E. Add NHRP redirects on the hub.
Correct Answer: DE
DMVPN disables the EIRGP next-hop-self with “no ip next-hop-self eigrp xxx” in DMVPN phase 2, and to go from Phase 2 to 3 you need use the NHRP protocol, and again enable EIRGP next-hop-self with “ip next-hop-self eigrp 134” under the tunnel interface https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-mt/sec-conn-dmvpn-15-mt-book/sec-conn-dmvpn-dmvpn.html#GUID-BF561439-BCC0-4AAF-80D9-1F7876CB7B81
Question 7:
Refer to the exhibit. A customer cannot establish an IKEv2 site-to-site VPN tunnel between two Cisco ASA devices. Based on the Syslog message, which action brings up the VPN tunnel?
A. Reduce the maximum SA limit on the local Cisco ASA.
B. Increase the maximum in-negotiation SA limit on the local Cisco ASA.
C. Remove the maximum SA limit on the remote Cisco ASA.
D. Correct the crypto access list on both Cisco ASA devices.
Correct Answer: B
Question 8:
Which two parameters help to map a VPN session to a tunnel group without using the tunnel group list? (Choose two.)
A. group-alias
B. certificate map
C. optimal gateway selection
D. group-URL
E. AnyConnect client version
Correct Answer: BD
Question 9:
Which method dynamically installs the network routes for remote tunnel endpoints?
A. policy-based routing
B. CEF
C. reverse route injection
D. route filtering
Correct Answer: C
Question 10:
Which command identifies a Cisco AnyConnect profile that was uploaded to the flash of an IOS router?
A. svc import profile SSL_profile flash:simos-profile.xml
B. anyconnect profile SSL_profile flash:simos-profile.xml
C. crypto vpn anyconnect profile SSL_profile flash:simos-profile.xml
D. webvpn import profile SSL_profile flash:simos-profile.xml
Correct Answer: C
Question 11:
Refer to the exhibit. Which value must be configured in the User Group field when the Cisco AnyConnect Profile is created to connect to an ASA headend with IPsec as the primary protocol?
A. address-pool
B. group-alias
C. group-policy
D. tunnel-group
Correct Answer: D
Question 12:
Refer to the exhibit. What is configured as a result of this command set?
A. FlexVPN client profile for IPv6
B. FlexVPN server to authorize groups by using an IPv6 external AAA
C. FlexVPN server for an IPv6 dVTI session
D. FlexVPN server to authenticate IPv6 peers by using EAP
Correct Answer: C
The configuration snippet is an identical match to the server configuration when you look it up. Not the client.
Question 13:
Which two types of web resources or protocols are enabled by default on the Cisco ASA Clientless SSL VPN portal? (Choose two.)
A. HTTP
B. ICA (Citrix)
C. VNC
D. RDP
E. CIFS
Correct Answer: AE
CCNP SVPN official cert guide
“NOTE You will not see an option of RDP, VNC, SSH, and/or Telnet unless the appropriate client/server plug-in has been installed first. “
Leaves only HTTP and CIFS as your options.
Question 14:
Which configuration construct must be used in a FlexVPN tunnel?
A. EAP configuration
B. multipoint GRE tunnel interface
C. IKEv1 policy
D. IKEv2 profile
Correct Answer: D
Question 15:
A Cisco AnyConnect client establishes an SSL VPN connection with an ASA at the corporate office. An engineer must ensure that the client’s computer meets the enterprise security policy. Which feature can update the client to meet an enterprise security policy?
A. Endpoint Assessment
B. Cisco Secure Desktop
C. Basic Host Scan
D. Advanced Endpoint Assessment
Correct Answer: D
the keyword here (Which feature can update the client to meet an enterprise security policy)
Enjoy two premium benefits for free! Although they are only part of the leads4pass 300-730 dumps!
Now, use PDF or VCE to practice leads4pass 300-730 dumps: https://www.leads4pass.com/300-730.html (171 Q&A), assisting you to pass the Cisco 300-730 SVPN certification exam 100% successfully.