CCDE certification exam has undergone many years of iterations from the earliest CCDE v2.0 (352-001) certification exam to today’s CCDE v3.0 (400-007) certification exam.

leads4pass has always been committed to assisting candidates to pass the CCDE certification exam, the latest CCDE v3.0 (400-007) certification exam to verify whether candidates have the ability to collect and clarify network function requirements…

The Cisco 400-007 exam contains rich content and has a high level of difficulty to pass the exam. Use leads4pass 400-007 dumps: https://www.leads4pass.com/400-007.html to assist you in completing all preparations, Help you pass the CCDE v3.0 certification exam successfully.

What are 400-007 dumps?

leads4pass 400-007 dumps contain 264 up-to-date exam questions and answers, verified by CCDE v3.0 professional team, as actually effective. And provide PDF files and a VCE simulation engine to help candidates practice the test.

Only practice will really help you pass, you can use the PDF file to read lightly, or you can use the VCE simulation engine to help you practice the test.

Why Choose leads4pass?

leads4pass has 10 years of certification exam experience and has always served IT, certification candidates, helping countless people to pass the exam successfully, and leads4pass has a complete exam guarantee policy and the most advantageous 365-day free update on the entire network, So why not use leads4pass? Use leads4pass to help you save more cost and time to help you get the job done easily.

The latest CCDE v3.0 (400-007) certification exam questions online sharing

Type	Number of exam questions	Exam name	Exam code	Last updated
Free	15	Cisco Certified Design Expert (CCDE Written)	400-007	352-001 dumps

Question 1:

What are two primary design constraints when a robust infrastructure solution is created? (Choose two.)

A. monitoring capabilities

B. project time frame

C. staff experience

D. component availability

E. total cost

Correct Answer: BE

Question 2:

You are using iSCSI to transfer files between a 10 Gigabit Ethernet storage system and a 1 Gigabit Ethernet server The performance is only approximately 700 Mbps and output drops are occurring on the server switch port. Which action will improve performance in a cost-effective manner?

A. Change the protocol to CIFS.

B. Increase the queue to at least 1 GB

C. Use a WRED random drop policy

D. Enable the TCP Nagle algorithm on the receiver

Correct Answer: A

Question 3:

Which management category is not part of the FCAPS framework?

A. Configuration

B. Security

C. Performance

D. Authentication

E. Fault-management

Correct Answer: D

Question 4:

A European national bank considers migrating its on-premises systems to a private cloud offering in a non-European location to significantly reduce IT costs. What is a primary factor prior to migration?

A. data governance

B. additional latency

C. security

D. cloud connectivity

Correct Answer: A

Question 5:

Your network operations team is deploying Access Control Lists (ACLs) across your Internet gateways They wish to place an ACL inbound on the Internet gateway interface facing the core network (the “trusted” interface). Which IP address would the ACL need for traffic sourced from the inside interface, to match the source address of the traffic?

A. inside global

B. outside global

C. inside local

D. outside local

Correct Answer: C

Question 6:

You are designing a large-scale DMVPN network with more than 500 spokes using EIGRP as the IGP protocol Which design option eliminates potential tunnel-down events on the spoke routers due to the holding time expiration?

A. Increase the hold queue on the physical interface of the hub router.

B. Increase the hold queue on the tunnel interface of the spoke routers

C. Increase the hold queue on the tunnel interface of the hub router

D. Apply QoS for pak_priority class

E. Increase the hold queue on the physical interface of the spoke routers.

Correct Answer: C

Question 7:

When designing a WAN that will be carrying real-time traffic, what are two important reasons to consider serialization delay? (Choose two )

A. Serialization delays are invariable because they depend only on the line rate of the interface

B. Serialization delays are variable because they depend on the line rate of the interface and on the type of packet being serialized.

C. Serialization delay is the time required to transmit the packet on the physical media.

D. Serialization delays are variable because they depend only on the size of the packet being serialized

E. Serialization delay depends not only on the line rate of the interface but also on the size of the packet

Correct Answer: BD

Question 8:

What are two common approaches to analyzing and designing networks? (Choose two.)

A. bottom-up approach

B. high-low security approach

C. top-down approach

D. left-right approach

E. three-tier approach

Correct Answer: AC

Question 9:

You are tasked to design a QoS policy for a service provider so they can include it in the design of their MPLS core network If the design must support an MPLS network with six classes, CEs will be managed by the service provider, which QoS policy should be recommended?

A. map IP CoS bits into the IP Precedence field

B. map flow-label bits into the Exp field

C. map IP precedence bits into the DSCP field

D. map DSCP bits into the Exp field

Correct Answer: D

Question 10:

A small organization of 20 employees is looking to deliver a network design service for modernizing customer networks to support advanced solutions.

Project scope and weekly progress should be visualized by the management.

Always consider feedback and make changes accordingly during the project.

Should consider flexibility to change scope at any point in time.

Which project methodology meets the requirements and has the least impact on the outcome?

A. Scrum

B. LEAN

C. Kanban

D. Six-Sigma

Correct Answer: C

Question 11:

Company XYZ has a new network based on IPv6. Some of the subnets that they are planning to use will be confidential and need an addressing scheme that confines them to the local campus network. Which type of IPv6 addresses can be used for these networks in the IPv6 addressing design?

A. local addresses

B. private addresses

C. link-local addresses

D. unique local addresses

Correct Answer: D

Question 12:

Refer to the exhibit.

Which impact of using three or more ABRs between the backbone area and area 1 is true?

A. In a large-scale network LSA replication by all ABRs can cause serious scalability issues

B. Multiple ABRs reduce the CPU processing on each A6R due to splitting prefix advertisement

C. In a large-scale network multiple ABRs can create micro-loops.

D. Prefixes from the non-backbone area are advertised by one ABR to the backbone

Correct Answer: A

Question 13:

An architect receives a business requirement from a CTO that states the RTO and RPO for a new system should be as close as possible to zero. Which replication method and data center technology should be used?

A. asynchronous replication over dual data centers via DWDM

B. synchronous replication over geographically dispersed dual data centers via MPLS

C. synchronous replication over dual data centers via Metro Ethernet

D. asynchronous replication over geographically dispersed dual data centers via CWDM

Correct Answer: C

Question 14:

Refer to the exhibit.

A customer runs OSPF with Area 5 between its aggregation router and an internal router When a network change occurs in the backbone. Area 5 starts having connectivity issues due to the SPF algorithm recalculating an abnormal number of times in Area 5 You are tasked to redesign this network to increase resiliency on the customer network with the caveat that Router B does not support the stub area

How can you accomplish this task*?

A. Increase the bandwidth on the connection between Router A and Router B

B. Implement LSA filtering ontheAB, allowing summary routes and preventing more specific routes into Area 5

C. Create a virtual link to Area 0 from Router B to the ABR

D. Turn on LSA throttling on all devices in Area 5

E. Set Area 5 to stubby at the ABR anyway

Correct Answer: B

Question 15:

An MPLS service provider is offering a standard EoMPLS-based VPLS service to Customer A. providing Layer 2 connectivity between a central site and approximately 100 remote sites. Customer A wants to use the VPLS network to carry its internal multicast video feeds which are sourced at the central site and consist of 20 groups at Mbps each. Which service provider recommendation offers the most scalability?

A. EoMPLS-based VPLS can carry multicast traffic in a scalable manner

B. Use a mesh of GRE tunnels to carry the streams between sites

C. Enable snooping mechanisms on the provider PE routers.

D. Replace VPLS with a Layer 3 MVPN solution to carry the streams between sites

Correct Answer: D

…

The above share 15 free CCDE v3.0 (400-007) certification exam questions for candidates to verify online, download the latest 400-007 dumps: https://www.leads4pass.com/400-007.html, get 264 up-to-date exam questions and answers, Use PDF or VCE to assist you to practice easily and help you pass the CCDE v3.0 certification exam successfully.

Summarize:

CCDE v3.0 certification exam is one of the most popular certification exams now, getting the certification exam success can help you get more opportunities and a high salary, but CCDE v3.0 (400-007) certification exam is not easy, Only practice, practice, practice can really help you succeed, and leads4pass 400-007 dumps can help you pass the exam successfully.